Pumice Products a natural and inert replacement for Microbeads

February 22nd, 2016


Since the banning of Microbeads in cosmetic products 2015 due to the environmental concerns over marine life, Pumice Powders and Pumice Grains have been seen as a direct replacement within the cosmetic industry. Pumice is a natural and inert mineral that can be used in either face, foot or body scrubs. The pumice powders and grains gently exfoliate, removing any dead skin and leave the body feeling fresh and revitalised.


For more information please click on one of the following links; Technical Specification, Contact Us


Calcium Carbonate the key ingredient to Dental Pastes

February 17th, 2016

Techfil Europe produces 4 high quality Calcium Carbonate grades for dental pastes. Our high purity dental grades are E170 certified, meaning that it can be consumed by humans.


The main benefits of calcium carbonate are that it gently helps remove debris from between the teeth and removes surface stains, allowing your teeth to look and feel healthier. Calcium Carbonate also supports healthy enamel.


Being an entirely natural product, our Calcium carbonate is a popular choice to international dental paste manufacturers such as Georganics, who produce a high quality dental products for the consumer market.Georganics - Toothpaste

The most popular products we supply to the dental industry are our M1 (5 micron) or V/40S (30 Micron) grades. Samples are available on request.


For more information please click on one of the following links: Technical Specification, Contact Us


Techfil Plastic Media Grades

February 11th, 2016


Techfil Europe have recently expanded the range of Plastic Medias available to clients.


Plastic media is  used to strip delicate surfaces of their existing coating. Plastic  abrasives deliver a high stripping rate and consistent performance,  ideal for paint stripping, mold cleaning, deflashing and deburring.

The  use of plastic abrasives has proven to be faster, less damaging to the  substrate and much less expensive than wet chemicals. Since the plastic  abrasive is harder than the coatings to be removed, yet softer than the  substrate, coatings can actually be stripped three or four times without  damage to the surface. The 3 main types available are:


Type II -  Thermoset Urea Formaldehyde
Type III -  Thermoset Melamine Formaldehyde
Type V -  Acrylic (cross linked polymer)

Plastic Media


For more information please feel free to contact us

Created and Hosted by WYSIWYG Computers